Choose Your Path:
You've come to another fork in the road. If you have an air cooler (marked F), you're in the right place, continue normally. If you have an AIO cooler (marked E), skip this page and go to Level 6A.
A. Remove the Plastic Twist Ties
There should be 4 twist ties holding the wires in the back of the case. Remove them by cutting or untwisting them.
B. Unscrew the Top Fan
Holding the top fan, remove the four kb 5*10 screws holding the top fan to the case. Gently lower the fan and pull the wire through the case opening before setting it aside.
C. Keep Rear Fan Untouched
Keep the rear fan untouched. When we move the top fan to the front, air will move over the parts and out the back.
D. Set Aside the Fan
The fan you removed will be reinstalled to the front of the PC case on step H. Set it aside, but keep it close.
E. Unscrew the Fan Bracket
Unscrew the two thumb-screws holding the fan bracket at the front interior of the PC.
F. Remove the Fan Bracket
Remove the fan bracket from the PC as shown above.
G1. Fan blades pointed outwards, no guard showing.
G2. Fan blades pointed inwards, “X” shaped guard showing.
H. Place Fan onto Bracket
Place the fan onto the fan bracket, with the “X” shaped guard showing. Position the fan towards the bottom of the bracket with its wire pointing to the left.
I. Flip the Bracket
Flip the bracket with the fan over, maintaining its position at the bottom of the bracket.
J. Screw Fan into the Bracket
Screw the case fan into the bracket using the provided kb 5*10 screws. Extras can be found in the white box labeled “NZXT” that came with your H510. From this angle, the fan cables will now be on the right side of the bracket.
K. Slide in the Fan Bracket
Running the fan cable through the larger case hole, slide the fan into the PC with “X” shaped guard showing.
L. Reattach the Fan Bracket
Attach the bracket back onto the front interior of the PC using the two thumb-screws.
Online Tech Chatnzxt.com/support
Call Center1 (844) 791-1341
Please sign in to leave a comment.