The Kraken Plus (2026) uses an Asetek Gen9 pump with an operating range of 1,200 – 3,200 ±300 RPM. Unlike previous generation Kraken coolers, the pump pulls power directly through a 4-pin PWM header rather than an external SATA power connector.
Pump Manufacturer | Asetek |
Generation | Gen 9 |
Connection Type | 4-pin PWM |
Pump Speed | 1,200 – 3,200 ±300 RPM |
Power Spec | 12V DC, 0.45A (5.4W) |
Can I connect the 4-pin PWM cable to an NZXT Controller (i.e. Control Hub)?
It is not recommended to connect the 4-pin PWM header from the Kraken Plus (2026) to any NZXT CAM Powered controller. For optimal performance, please only connect the 4-pin PWM cable either to a CPU_FAN or AIO_PUMP header on your PC's motherboard.
Comments
0 comments
Article is closed for comments.