Gigabyte Motherboard Specific Guide

This guide is written specifically for NZXT Gaming PCs using Gigabyte branded motherboards.  You can confirm your motherboard model in the motherboard UEFI BIOS, in the System Information app, or by checking System Specs in the NZXT CAM software. Screenshots were captured on the B650 UD AX motherboard.  Instructions may vary from product to product.

AMD EXPO™ and Intel® XMP are a feature found on many modern PCs to allow easy access to higher RAM performance with only a few clicks.  This is done by including pre-configured profiles on the RAM modules that can be read and set up by the motherboard.

Why enable AMD EXPO™ or Intel® XMP?

Enabling AMD EXPO™ or Intel® XMP allows your RAM to run at a higher validated speed, pre-configuring voltage and timings to improve your overall system performance.  While this may not translate to an overall higher FPS in gaming, it can see your average FPS improve by raising your minimum FPS (also known as 1% lows).  Enabling this feature can also help improve load times and performance for CPU bound games and applications, allowing for quicker access to data loaded into memory.

Does enabling AMD EXPO™ or Intel® XMP affect my warranty?

Enabling these features does not affect your system warranty, however we are not able to guarantee stability while these features are active.  This is because overclocking your memory will increase stress on the CPU's memory controller as well as the RAM itself.  Additionally, enabling XMP on systems with more than two (2) memory modules can cause greater instability issues.

Enabling AMD EXPO™ or Intel® XMP

To enable AMD EXPO™ or Intel® XMP, first reboot your PC into the UEFI/BIOS.  This can be done by pressing Delete at the startup splash screen as shown above.

By default, most Gaming PCs will boot to Easy Mode for the BIOS as shown above.  To enable AMD EXPO™ or Intel® XMP, select the dropdown in the bottom-left corner and select one of the profiles provided.  Some RAM kits may include multiple profiles, however it's recommended to select the profile that matches your platform if available.

Once the profile has been enabled, the specs of the RAM will appear to the right side of the dropdown box.  From here, click the Save & Exit option at the top of the screen and save your settings to restart the PC.