The Control Hub included with the H9 Flow RGB+ cases uses an 8-pin (6+2-pin) PCIe Power Connector like those used on many graphics cards. This cable may be labeled either PCIe or VGA depending on the power supply manufacturer.
| PCIe (6+2-pin) vs. CPU 12V (4+4-pin) |
When connecting the Control Hub, make sure that you are using a PCIE (6+2-pin) connector and not the CPU 12V (4+4-pin) connector. Using the incorrect connector can result in immediate damage to your controller and other components. CPU 12V may also be labeled as EPS depending on the power supply manufacturer. |
Comments
0 comments
Article is closed for comments.