Depending on your needs, there are many models of the Kraken Elite to fit your build. The chart below should help out with finding which Kraken models are compatible with your case of choice.
Current Cases
| H5 Flow | H6 Flow | H7 Flow | H9 Flow/Elite | |
| 240 | Top, Front | Top | Top, Front | Top, Side** |
| 280 | Top*, Front | Top | Top, Front | Top |
| 360 | Front | Top | Top, Front | Top, Side** |
*Top 280 mm radiator support for H5 Flow is only supported with low-profile memory.
**Top mounting is recommended when mounting the Kraken Elite in all H9 cases.
2022-2023 Cases
|
H5 Flow/Elite |
H7 Flow/Elite |
|
| 240 | Top, Front | Top, Front |
| 280 | Front | Top, Front |
| 360 | Not Compatible | Top, Front |
Legacy H-Series Cases
| H200/H210 Series | H400 Series | H500/H510 Series | H700/H710 Series | |
| 240 | Front* | Front* | Front* | Top, Front |
| 280 | Not Compatible | Front* | Front* | Top, Front |
| 360 | Not Compatible | Not compatible | Not Compatible | Top, Front |
*Front mounting will reduce the amount of available length for installed GPUs up to the total thickness of the radiator + fans. Please refer to your case manual when confirming GPU and radiator compatibility.
Is the Kraken Elite series compatible with the NZXT H1 series of cases?
The Kraken Elite series is not compatible with any NZXT H1 series cases, as the H1 uses a custom-sized 140 mm AIO liquid cooler.
Comments
0 commentsArticle is closed for comments.