The following connections are needed for the Kraken Plus:
Two (2) 4-pin PWM Fan Headers
One (1) 5V ARGB header or One (1) 4-pin NZXT RGB header
One (1) 9-pin USB 2.0 Internal Header
Where do I connect the Fan and Pump 4-pin PWM cables?
It is highly recommended to connect the fan's 4-pin PWM cable (A9) to the CPU_FAN header on the motherboard, with the pump's 4-pin PWM cable (A6) connected to either AIO_PUMP or CPU_OPT (naming is motherboard dependent).
If you are connecting the 4-pin PWM header for the fan to an NZXT CAM Powered controller, it is instead recommended to connect the pump's 4-pin cable to the CPU_FAN header on the motherboard to prevent a CPU_FAN Error.
Do not connect the pump's 4-pin PWM header to any NZXT CAM Powered controller.
Comments
0 comments
Article is closed for comments.