The H3 Flow features one 2.5" compatible drive mount behind the motherboard tray, as well as a flexible mount at the bottom of the case that can support either two (2) 2.5" drives/devices or one (1) 3.5" drive.

2.5" Storage Drives and Devices

2.5" Storage Drives as well as 2.5" compatible devices that use standard underside mounting for 2.5" drives can be installed either behind the motherboard tray or in the bottom of the case.

• One (1) device behind the motherboard tray
• Two (2) devices at the bottom of the case

These can be secured to the case using the included M3 x 5 mm screws from the accessory box.

Note:  When using the motherboard tray mount, you must install the drive or device before installing the motherboard.

3.5" Storage Drives & Devices

The bottom of the case can support a single 3.5" storage drive or device.  This device can be secured using the included 6-32 x 5 mm screws from the accessory box.

Note:  When using a 3.5" drive or device, you will not be able to attach an additional 2.5" drive or device at the bottom of the case.