| Case | H1 | H210/H210i | H510/H510i | H710/H710i |
| Dimensions (with feet attachments) |
187mm x 387.7mm x 187.6mm |
210mm x 349mm x 372mm |
210mm x 460mm x 428mm |
230mm x 516mm x 494mm |
| Form Factor(s) Supported | Mini-ITX | Mini-ITX | Mini-ITX, MicroATX, & ATX | Mini-ITX, MicroATX, ATX, & EATX (up to 272mm) |
| Fan Support |
1x140mm (Included with 140mm AIO CPU cooler) |
Front: 2x 120mm or 2x 140mm Top: 1x 120mm Rear: 1x 120mm |
Front: 2x 120mm or 2x 140mm Top: 1x 120mm or 1x 140mm |
Front: 3x 120mm or 2x 140mm Top: 3x 120mm or 2x 140mm Rear: 1x 120mm or 140mm |
| Drive Bays |
2.5" -- 2 |
2.5" -- 3+1 3.5" -- 1 |
2.5" -- 2+1 3.5" -- 2+1 |
2.5" -- 7 3.5" -- 2+1 |
| Clearances |
GPU: 305mmX128mm OR 2.5 Slots |
GPU: Up to 325mm *** Thickness: 44mm CPU Cooler: 165mm |
GPU: 381mm CPU Cooler: 165mm |
GPU: 413mm CPU Cooler: 185mm |
This handy chart pulls the primary specifications of each of our H-series cases into one location! This should make cross-referencing and making a decision between them much easier.
For additional specifications, you can reference the Store page for each case individually, starting here: https://www.nzxt.com/categories/cases
*** For the H210/H210i, the max GPU length is dependent on what is installed to the front of the case. Any radiators or fans need to had their width subtracted from the 325mm clearance in order to determine if your GPU will fit.
Comments
0 commentsArticle is closed for comments.