Follow

Hue 2 Installation

Step 1:

Mount the Hue 2 with the 3M double sided tape on a 3.5 drive bay or SSD tray.

Step 2:

Connect the Molex power cable to the PSU and then to the Hue 2

Step 3:

Connect the micro USB cable to the motherboard and into the Hue 2

Step 3: Connect the channel connection cable to one of the channels on the Hue 2 and then connect an LED strip to the connection cable. Align the arrow with the black line on the LED strip.

Step 4: Mount the LED’s either with the magnetic backing to the chassis or with the 3M tape applied.

Step 5: DONE. Install CAM, and you should be good to go.

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request
Powered by Zendesk