Below is a step-by-step guide on how to install Hue 2 Ambient Lighting.
Step 1: Using the provided 3M tape, attach the controller to the lower left corner on the back of your monitor. Please leave at least 3 inches of space between the bottom and left side of the controller.
Step 2: Plug in the wall adapter into the appropriate wall socket with the correct adapter for your region.
Step 3: Connect the power adapter and micro USB cable to the ambient controller and then to your system with the standard USB type A to the back of your system.
Step 4: On the back of your monitor, start with the vertical strip on the left side first (Channel 1 is Strip #1), with the male end of LED strip toward the top of the monitor and female end facing the bottom. Connect the 150mm (6 inch) connection cable from Channel 1 on the controller to the female connector on the LED strip.
Step 5: Connect the correct length LED strips for the horizontal edge of your monitor. Do not remove the backing from the adhesive tape yet. Connect the 150mm extension cable to the vertical strip. Remove the adhesive backing, then position the horizontal strips and carefully adhere them, making sure the connectors are aligned correctly. Create a loop in the 150mm corner extension and connect it to the horizontal LED strip. Using the cable holder, secure the 150mm corner extension cable to the monitor.
Step 6: Repeat for the other strips, install CAM, and you’re done!
If you need assistance or have any further questions, please contact our Customer Support Team.