With the addition of a fan controller to the H1 V2, you are now able to adjust the speeds of the included 92mm and 140mm fans. This controller also powers the H1 V2 AIO Liquid Cooler but is not able to control the pump, as the pump is designed to run at max speed at all times.
First, we will need to open our CAM software as shown below.
Next, you will need to go to the "Cooling" tab as shown below.
To adjust your rear fan or CPU fan, you would need to next click on the fan you'd like to adjust.
That's it! Now you should be able to adjust your Rear/CPU Fans for the best performance possible! We recommend leaving these on silent but if you would like to tune the profiles further change the mode from Silent to "Custom."