H-Series Case Comparison Guide

Have more questions? Submit a request
Case H1 H210/H210i H510/H510i H710/H710i
Dimensions (with feet attachments)

187mm x

387.7mm x


210mm x

349mm x


210mm x

460mm x


230mm x

516mm x


Form Factor(s) Supported Mini-ITX Mini-ITX Mini-ITX, MicroATX, & ATX Mini-ITX, MicroATX, ATX, & EATX (up to 272mm)
Fan Support

1x140mm (Included with 140mm AIO CPU cooler)

Front: 2x 120mm or 2x 140mm

Top: 1x 120mm

Rear: 1x 120mm

Front: 2x 120mm or 2x 140mm

Top: 1x 120mm or 1x 140mm
Rear: 1x 120mm

Front: 3 x 120mm or 2x 140mm

Top: 3 x 120mm or 2x 140mm

Rear: 1x 120mm or 140mm

Drive Bays

2.5" -- 2

2.5" -- 3+1

3.5" -- 1

2.5" -- 2+1

3.5" -- 2+1

2.5" -- 7

3.5" -- 2+1



305mmX128mm OR

2.5 Slots

GPU: Up to 325mm ***

Thickness: 44mm

CPU Cooler: 165mm

GPU: 381mm

CPU Cooler: 165mm

GPU: 413mm

CPU Cooler: 185mm

This handy chart pulls the primary specifications of each of our H-series cases into one location! This should make cross-referencing and making a decision between them much easier. 

For additional specifications, you can reference the Store page for each case individually, starting here: https://www.nzxt.com/categories/cases 

*** For the H210/H210i, the max GPU length is dependent on what is installed to the front of the case. Any radiators or fans need to had their width subtracted from the 325mm clearance in order to determine if your GPU will fit.

Articles in this section

Was this article helpful?
3 out of 4 found this helpful



Article is closed for comments.